Tilt stand for DPS5005 case

This is a somewhat parametric tilt stand for a DPS5005 power supply case like this one:

https://www.amazon.de/gp/product/B077NZF6DZ

The included STL has a 17° angle, and 15 mm extra vertical lift, which is perfect for my case. The OpenSCAD files are included, so it should be easy to adjust that to your needs.

Print instructions

You want to print two feet. Carefully insert the M3 hex nuts into their traps. Such a “parrot” tool does that nicely …. ;-) Then fix the feet to the case body using M3x10 screws. The holes are already in the case body.