Weight Watchers Scale Foot

Weight Watcher (WW) Stand on digital Scale - Foot ; Spare Parts

This is a foot to replace the plastic feet on the Weight Watchers scale that we have at home.

Foot Size is roughly:

• 26mm outer diameter
• 15mm inner diameter
• Spacer height 6.5mm
• Full height 9mm

There are two styles, one similar to the original, but some areas slightly thicker for strength and one more solid print, should work the same, but looks more solid, unlike original feet.

My prints were a really good snug fit.

I printed my foot solid (100% infill), this took 1.2m length of filament and took 30 mins ;
at 20% infill this was 760mm filament length 17minutes to print. No supports required if printed with thick round base on the bed.