Pocket Hole Plug

I originally designed this for my Kreg pocket hole screws that I use for DIY.

There are 2 versions included depending on how far in your screws are in the hole.

Use the LONG version if possible as the standard version or the SHORT version if the screw is almost sticking out of the pocket hole.

Make sure you test fit before gluing in with PVA glue. Wipe off any excess glue if you put too much on.

Do you want to be able to sell any or ALL of my prints shown here on Printables.com?
If so, then click on the 'buy me a coffee' link below, (or click here) and join one of my memberships. This gives you the option of a monthly, yearly or lifetime commercial license, along with a certificate and loyalty bonus models (both commercial and non-commercial). The non-commercial items are 3rd party models that may also interest you, all in one place.
The lifetime membership offers you unique commercial items not available to anyone else as well as all of the loyalty bonus models.

Please click the LIKE (Heart) Button if you like my models. If you REALLY like them, then please also buy me a coffee at the bottom of the page. Thank you.

Printing Instructions:

I printed these on my Creality CR-6 SE printer with Cura slicer. (other printers/slicers can be used).

Material: PLA

Manufacturer: Prima Value

Colour: Light Grey

Resolution: 0.1

Nozzle: 0.4mm

Print Speed: 60mm/s

Nozzle Temperature: 210 Degrees

Bed Temperature: 60 Degrees

Infill: 100%

Supports: No

Skirt: Yes

Brim: No

Raft: No

Print flat side down. You can experiment with infill but these are very quick to print even at .01 and 100% infill.

Enjoy your DIY.

                             https://www.buymeacoffee.com/tigertone