Printer Tool Holder

3D Printer Tool Holder

v4 - Now with larger holes & thinner walls.

3D printer tool holder for the most common tools I reach for each print.

I have a very small space for my printer setup, on top of a small file cabinet. Once the file drawer was stuffed with filament I was shuffling around my tools to make space on the little ledge.

Designed this so they're all at hand without being in the way of the printer door.

Rack has a back lip, using a bit of micro gel tape it fixed to the edge and underside of the shelf solid.

Holds spray bottle, cleaning cloth, nippers, tweezer, spatula and glue stick..

Printed corner to corner on my FlashForge Adventurer 3 Pro. Took 9 hours in "PLA Standard" [temp 210c, bed 50c, .18mm, with raft and linear supports for back "ledge".]

Easily slice off the back ledge for wall mounting and to avoid using supports and make it print faster. I needed it to prevent the rack from rolling under the shelf. Works well, sturdy.

v4 - New glue sticks are larger than my previous ones.. I edited all the "holes" so they were larger and deeper. still solid. Made the nipper hole so it could fit a more quality pair. Squared the tweezer hole so I could fit 2 types in it.

Updated with all v4 images.

Print Settings

Printer Brand:

FlashForge

Printer:

Rafts:

Yes

Supports:

Resolution:

.18

Infill:

Filament: Amolen PLA Marble

Category: 3D Printer Accessories