Toilet cistern lever arm - 25mm dog leg

Not a glamorous item but when you need one of these then this might help.

Replacement toilet cistern internal lever arm.

This lever arm's special feature is a 25mm dog leg (switchable left or right) and could also be used for normal mounting (i.e. where a dog leg is not required).

I found some supplied lever bars (square bar connecting the the external flush lever to the internal lever arm) were too short causing miss-alignment and putting strain on the cistern syphon piston.

I created this dog legged lever arm to help correct the alignment and reduce the stress by compensating for a short lever bar.

Print with a 70% or more infill.

Print Settings

Printer:

Qiditech One

Rafts:

Supports:

Yes

Resolution:

Infill:

70

Filament:

ABS / PLA ABS

Category: 3D Printing