May 17, 2022
Description
Center this within the slicer for your Anycubic Photon, and then print it. Count the ridges on the sides. There should be 10 of them. The ridges are 0.25mm wide and 0.5mm apart.
For each one missing, you are losing 0.25 to 0.50mm of LCD pixels from the screen's mask. Use this to calibrate your slicer's printing envelope.
The normal screen size is:
120.96x68.04mm.
Resolution | 2560x1440
Pixel Pitch | 0.04725mm by 0.04725mm (538ppi)
Category: 3D Printing TestsLicense:
Creative Commons — Attribution
7
rsilvers
