Electrolux AC exhaust adapter

This adapter attaches to the end of the standard Electrolux AC exhaust nozzle. 

It's made so that the extensions and vents from here can be used on the end.

The locking collars simply slides onto the rims of both the original nozzle and the printed adapter. And then secured with two M3 nuts and bolts.

Hardware required:

2x M3 bolts (15-17mm long).
2x M3 nuts.

Insert the nuts into the slots on the side of the collar and then just screw the two parts together.

Printing:

For best results the locking collars should be printed with supports on the inner overhangs (skip supports inside the screw holes).

General Info:

The Electrolux nozzle I got with my Chill Flex AC is in the shape of an oblong that is ~166mm long and ~78mm wide.