It is an 80mm Y with 3mm walls 45 degree angle and Equilateral 3D Printer File Image 1

It is an 80mm Y with 3mm walls 45 degree angle and Equilateral 3D Printer File Image 2

It is an 80mm Y with 3mm walls 45 degree angle and Equilateral 3D Printer File Image 3

It is an 80mm Y with 3mm walls 45 degree angle and Equilateral 3D Printer File Thumbnail 1

It is an 80mm Y with 3mm walls 45 degree angle and Equilateral

HAL_9000

May 18, 2022

Description Comments Tags

Description

someone on facebook wanted this so I spent 4 minutes on it... it should print fine with a brim. took me longer to upload than make... internal diameter 80mm outer diameter 86mm so 3mm walls

2 versions one asymmetric with 45 degrees and one equilateral

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

No

Supports:

No

Resolution:

.3

Infill:

100

Filament: any any sorta any

Notes:

always print flat side down... and this will need a brim to hold it solid to the plate... never printed it, but make stuff like this all the time... this will print.

Category: Gadgets

License:

Creative Commons — Attribution — Noncommercial — Share Alike