May 18, 2022
Description
Created this as an alternative to the crappy mount that comes with the camera.. Either screw it into something using the 2 4mm holes or stick some double stick tape on it and place it wherever you need it!
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
Notes:
Print this on one of the flat sides for best results. Use double stick tape or 4mm (or something close) to keep it where you want it!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
HAL_9000
