Ubiquiti ceiling grid mount

Designed for a #6 Hillman nut (Lowes) and 1/2 screw. Mount both the plastic and metal disks provided with the AP ( plastic disk is flimsy on the AC pros and the metal disk helps). This should give just enough clearance so the 1/2 screw will be flush with the top of the bracket.

Print Settings

Printer Brand:

Wanhao

Printer:

Rafts:

No

Supports:

Resolution:

.2

Infill:

Notes:

Print on edge ( so nut recess is facing front) Required for strength of part.

If you print flat the ears are weak and will snap off.

With "tree support" and "adaptive layers" to speed up print and reduce support needed.

2 shells, 4 top/bottom if printed in the correct orientation its rock solid.

Category: Parts