Ethernet cable clip for mounting next to furniture

Cable clamps are usually supposed to be mounted on a sturdy wall with a simple nail or a small screw. But on some older buildings, the wall is often too porose and would need larger screws and a (chemical) dowel. To avoid this, also some furniture next to it can be used to support the cable clamp.

It is important that the furniture itself only has a small cap between itself and the wall.

To hide the nail, a small cover can be attached. It might be necessary to mirror it inside the slicer when the cable should not be mounted on the right side of the furniture.

Print Settings

Printer:

Qidi X-MAX

Rafts:

Supports:

No

Resolution:

Infill:

100%

Filament:

Geeetech PLA

White

Notes:

Category: Organization