ERCF - Cleaned Logos and Repairs

I'm building an ERCF (enraged rabbit carrot feeder) 9-port color switcher for my V-core3 and ran into some issues with the provided files.

First of all, I wanted to get rid of the Voron logos on it, and second was that some of the parts had wrong holes, because no matter how I printed them, I couldn't get it to fit.

The file-names represent the original names with a suffix for MOD for modified or BLANK for no Voron logo. The files are based on revision 1.1 of the ERCF.

Overview:

Calib_Test_MOD

Some of the holes didn't fit. Print this first before continuing with the other parts.

[a]_Top_Hat_xN_MOD

The hole for the 6x3mm magnet was too small.

Filament_Block_xN_MOD

The hole for the 6x3mm magnet was also too small.

[a]_Drag_Chain_Anchor_Bottom_MOD

The holes for the heat inserts where far too big and the inserts fell through. Also the hole distance was too far apart for the drag chain (10mm instead of 8mm)

All BLANKS

Just cleaned the parts from Voron logos. There is also no need for the Logo-plate for the gear_box_front-part.