Kingkiller Chronicle Soap Dish - Brazen Gear

This soap dish was inspired by the epic soap making seen from The Slow Regard of Silent Things by Patrick Rothfuss.

Print with flat side towards build plate, I think Hilbert curve may look really good for the top infill for the gear but haven't tried it myself.

I suggest spraying with a clear coat for better water resistance.

Bottom of the soap dish is sloped towards the drain hole to prevent build up of water in the dish. I could make a flat bottomed version with no hole if someone wanted that.

These were printed in PLA (Hatchbox Bronze and Prusament Galaxy Silver) with a 0.2mm layer height and 10% gyroid infill.

Do not glue parts together you want to be able to disassemble this for cleaning from time to time.

Other inserts could easily be designed to fit this dish holder.