SKR 1.3/SKR 1.4/SKR 2.0 DIN Mount

Based on the ingenious design by jwags55. This remix is designed to fit BigTreeTech SKR 1.3/SKR 1.4/SKR 2.0 boards (Or anything with an 84.3mm dimension). It should be a tight fit on 35mm DIN Rails and hold the board securely.Note: It's really easy for me to tune the parameters so if it's too loose/tight let me know in the comments and I can make some adjustments.

Features

• Snap fits to DIN and Board (No screws needed)
• Works with PLA
• Low profile
• No tools required
• Easy and fast to print (No supports)

Printing Tips

• Use 4 perimeters
• 4 Top/Bottom layers
• 20% Gyroid infill

Print Settings

Printer:

BLV Cube

Rafts:

Supports:

No

Resolution:

Infill:

20%

Filament:

Radio Shack :-) PLA

Blue

Notes:

Category: 3D Printer Parts