Moai Soap Holder

Again, I have debased Julien_DaCosta's excellent model on Thingiverse (https://www.thingiverse.com/thing:2493386) in hopes of winning a few measly Prusameters. So here you go: he's got a tray in his lower jaw and an “esophagus” to drain the soap scum down his throat and out the back.

I have to confess, I only printed this at half-scale because this is a BIG print – at least 9 or 10 hours at full scale for a  full-sized bar of soap (nominally 51mm wide by 28mm thick). Plus, I'm guessing my wife wouldn't be too thrilled with a half-pound hunk of PLA sitting on the bathroom counter.