May 25, 2022
Description
Here's a a few simple boots for 64oz, 32-40oz and 12-20oz Hydro Flasks. There is also a version for the narrow top Hydro Flask and the Tumbler Hydro Flask . Please note, this MUST be printed in TPU to fit as rigid filaments will not work.
The advantage over some other designs is I've added appropriate fillets all over and extra bumper on the bottom.
Also, please note, there are different diameters of 64oz Hydro Flask growlers depending on the year you made your purchase. Pay close attention to the pictures, or measure, to ensure this will work for your application.
Boot height: 50mm
Boot Bottom Thickness: 3mm
Boot Wall Thickness: 1.6mm
If you're looking for the handle, see my post here: https://www.thingiverse.com/thing:5211069
Rafts:
No
Supports:
No
Resolution:
0.2mm layers (0.4mm nozzle)
Infill:
30%
Filament: Any TPU Any
Notes:
Wall thickness of 2 will yield solid walls due to the 1.6mm wall thickness in the design(s). The bottoms is 3mm thick so that you can use a little infill to act like a bumper.
License:
Creative Commons — Attribution — Share Alike
11
DJMac
