Youtube Play Button Award Plaque

This is a plaque I designed for a youtuber. You can add your own custom text by loading this model into tinkercad, I left the text field empty in order for you to do this, or leave it blank. In order to get both colors going you have to add in a vertical pause at height in the gcode, this is easily achieved in cura by using the top menu Extensions->Post Processing->Modify gcode->Pause at height and change the settings to pause at the layer you want to do a color swap at. This layer number will change based on your slicers settings and layer height but I usually slice the model and enter preview mode to see which layer the color should swap at. If you are struggling with the pause at height feel free to drop a comment, a good video of this for cura can be found on youtube by searching for Multi-Color 3D Print in CURA 3 on ENDER 3 under the CHEP channel. Should be the same for most machines even if you aren using an ender3

Print instructions

Category: Decor Print Settings

Printer Brand: Creality

Printer: Ender 3 Pro

Rafts: No

Supports: No

Resolution: .2

Infill: 5%

Filament: Inland PLA White, Red
Notes:

Print speed was 50 mm/s

How I Designed This

Tinkercad!