January 8, 2023
Description
If you want, check my other new design here, now with adjustable view!
----------------------------
Hi all, I've bought a Pi cam from Aliexpress but it wont fit so i fully remixed TinkrMakr's original file (thx for .step file) to a compatible design for square camera's + some addons: now you don't need supports at all for the X axis stress relief and even if your printer tolerance are different than mine you can secure the camera mount to the X motor thanks to 2x zip ties. Also, I gave it a more "squared" design and slightly increased the size of the pins, now it stays in place without using tape. Feel free to ask if you have problems.
BEFORE PRINT: measure thickness from back to the ribbon cable, if it's more than 3.90 mm THE MODULE WON'T FIT! DON'T WASTE FILAMENT!
You only need x3 zip ties
Printed in PETG and 0.20 SPEED stock profile with variable height
This is the pi cam module i used:
License:
Creative Commons — Attribution — Noncommercial — Share Alike
7
crokobacon
