Wheel for the Igea Compact vacuum cleaner

Replacement wheel for the Igea Compact vacuum cleaner. Slightly modified in some parts for strength and easy printing.

Print Settings

Printer:

Modded Craftbot

Rafts:

Supports:

Yes

Resolution:

Infill:

33 %

Filament:

Any PETG, ABS, PLA

Black

Notes:

Post-Printing =============

Remove supports and clean up the print.

Now you have to disassemble the old wheel: Using a thin screwdriver, lever the outer cover off the original wheel. Then pull off the rubber part. Do this by levering a small part out of the groove that you can then grab and pull the entire thing off.

Now to assemple the new wheel: Place the rubber part on the printed wheel and insert the flanges in the grooves. Now just snap the cover in the three holes. Congratulations, you have a new wheel!

Insert the wheel axle in the hole and screw on the holder disc using a 3,2mm wood screw. Repair finished!

Category: Replacement Parts