May 27, 2022
Description
A simple funnel to make filling the Focusvape easier. Designed with a snug fit to make it stick once you put it on the Focusvape. If it is too snug, sand the smaller inside diameter a bit.
Printer:
Heavily modded Craftbot
Rafts:
No
Supports:
No
Resolution:
0.1-0.3mm
Infill:
20%
Filament:
any PLA
Notes:
Print with the wide part down, that way you don't need any supports
License:
Creative Commons — Public Domain
9
TheParrotGuy
