August 5, 2024
Description
Speedloader for multiple types of magazines.
Print one body then the Insert type/types you need and switch out just the insert.
Easy Disassembly.
Springloaded.
Quick change insert/part replacement.
100% 3D Printed.
Thumb/Finger/Time/Sanity Saver!
Inserts Available for -
Remix Insert by Jason N fits-
Remix Slide by William
All models provided have been tested. 40 cal or other magazines may work with the 9mm inserts like the Glock one does but I have none to test.
Recommend using PETG for durability, heat resistance if you're outside, and the springs springiness.
0.20 Layer thickness
All parts are pre-oriented for optimal printing
Total Body parts print time - 13 hours
Each Insert print time - 3 hours
Parts
Clips - 2 each - 25% infill
Lt and Rt body - 25% infill, support on build plate only
Stress parts
Slide - 100% infill
Inserts - 100% infill, support on build plate only
Springs - 2 each- 3 perimeters
Assembly
See pictures for reference
Haven't broken any parts yet but if they do its easy to replace
Troubleshooting
If the insert seems to stick and doesn't move smoothly or the insert doesn't seem to go down all the way and the round is not fully inserted into the magazine, there is probably too much overhang from the body binding on the springs,
Long fix - recalibrate your machine to do better bridge overhangs
Short fix - reprint springs, slice at 90-95% z-axis
License:
Creative Commons — Attribution — Noncommercial
11
Subtle3D
