May 28, 2022
Description
This is a table center piece I made for Superbowl LII. It prints in 4 separate colors and assembles by snapping the pieces into the blue main part. Tolerance used is 0.3mm. Meant to be printed in 0.2mm
Printer:
Creality CR-10
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Notes:
I printed this with 8 bottom and top layers since some of the parts will print over the infill and would otherwise print in mid air.
This was done in Fusion 360 based off of SVGs from the internet.
Render in Fusion 360
Main part printed
All the parts assembled
Category: DecorLicense:
Creative Commons — Attribution — Noncommercial
Marcel Isler
