Handle for printer or ATX PSU

Handle for 3D printer 2020 profile and standard ATX power supply
(Diy ozone generator or diy universal power supply)

I designed it so that the length is no bigger than an ATX PSU and the width is 20mm as the size of the 2020 alu profile.
Can be printed in any position without support!
Printing time is the same in all positions! (see the photos)

To avoid the need for a support when standing on the base, a layer is designed in the hole, which is easily drilled out after printing with a drill bit of 6mm.

Printing time is 0.4mm nozzle, 0.2mm layer height and 50mm/s at a speed of 1 hour 50 minutes