Husqvarna open-toe foot

This is an open-toe foot for the Designer series Husqvarna sewing machines. It will probably work with other Husqvarna machines as well.

I printed it sideways with support and a raft so the mounting pin would come out round and clean.

Edit 11/14/2015

I discovered that the clearance between the mounting pin and the top of the foot was too tight to print reliably, so I moved it a millimeter or so. Now it prints much more reliably. and still works great on the machine.

I also added a second file that has 'helper disks' from Makerbot Desktop added to it so it will print laying flat without a raft. The helper disks are much easier to clean up after than a raft, and seem to work just as well in this case.

Print instructions

Post-Printing

If you print it on it's side, there will be more cleanup of support material.

You will probably need to sand the toes a bit so they don't snag on the material while sewing.