Joy List Fridge magnet ( Vision Board Fridge Design)

This magnet is a remix of an old design and a remix of the "Joy Bucket" or Vision Board Concept.  The idea is to stick pictures of the things that bring you joy and attach them to the various tentacles on the magnet. It serves as a reminder of what brings you joy and reminds you to make time for them. (Also it's another way to work in your 3D Printer into every conversation.)

The Joy Bucket and Vision Board concept helped our family through some tough times in the past and now we continue to use it to remind ourselves what brings us joy.  I thought this would be a different idea to use the fridge for a display.

I wanted to design a Print in Place model for this design that is loosely modelled off the Octopus designs that you see floating around the internet.I figured it would also be cool to make it a fridge magnet too

The Model fits 2 different sizes of magnets if you want, but really you can get away with the smaller of the 2 since they fit into each leg and allow you to pose the model on a metal surface.

The magnets I used were

6mm diameter x 3mm high for the leg magnets

12mm diameter x 2mm high for the central magnet.

Purchased from amazon.ca

https://www.amazon.ca/dp/B07WCN5FGD/ref=cm_sw_em_r_mt_dp_TF0S2ZFMG0P5DV7BF5M9?_encoding=UTF8&psc=1

and

https://www.amazon.ca/dp/B07GX7Z4DF/ref=cm_sw_em_r_mt_dp_ZT22HT5TT46R086EKF5Q?_encoding=UTF8&psc=1

Print in place, Pop off Bed

I added the various pieces and spikes in order to prevent needed a raft or Brim. It should be able to be printed right onto the bed. I have had plenty of success and I wish you all the best (every printer is a bit different but I was getting repeatable results with this design and my printer.