Open RC Car

This is the OpenRC Car Version 2!!

The build video: https://www.youtube.com/watch?v=ptg5uSprJf8&list=PLD3Pf0OGUoDpkLEQuaGIsUl0d8uHpPDvy

How I Designed the OpenRC Car2: https://www.youtube.com/watch?v=QIoBCYvPrPU&list=PLD3Pf0OGUoDpkLEQuaGIsUl0d8uHpPDvy&index=2

In the past few weeks I've designed another RC Car but now a better vesion with better RC Materials!!

I made a Inventor tutorial about this project! : 3D Modeling Car #9 - Open RC Car V2

I Made a DIY video about this project! : DIY - Open RC Car V2

These are the RC materials that you need:

• Reciever and transmitter (I use Carson): https://www.conrad.be/p/carson-modellsport-reflex-wheel-start-rc-pistoolzender-24-ghz-aantal-kanalen-3-incl-ontvanger-1920203
• Servo (120°): https://www.gotron.be/analog-micro-servo-1-3kg-cm-120-rotation.html
• ESC (Electric Speed Controller) (I made one from an old servo): https://www.gotron.be/analog-micro-servo-1-3kg-cm-120-rotation.html
• 3VDC Electromotor with a long shaft: https://www.conrad.be/p/motraxx-xtrain-sf135-brushed-mini-elektromotor-13000-omwmin-1362616
• 2x 3,7V LiPo Battery: https://www.conrad.be/p/reely-race-copter-vliegaccu-geschikt-voor-reely-x-140-1563461

Used bolts, nuts and washers:

• 15x M2 x 12mm Bolts
• 4x M2 Nuts
• 4x M2 Washers
• 4x M3 Bolts
• 10x M3 Nuts
• 8x M3 Washers
• 4x M4 Bolts
• 2x M4 Nuts
• 4x M4 Washers
• Range of bolts, nuts and washers: https://www.conrad.be/p/velleman-ksc1-ksc1-moeren-assortiment-1-stuks-097778

Print Settings

Printer Brand:

Wanhao

Printer:

Rafts:

No

Supports:

Resolution:

0,15 mm Layer Heights

Infill:

Filament: Vertex PLA Orange and grey

Category: R/C Vehicles