January 2, 2023
Description
After designing and printing the insert (See https://www.printables.com/model/211394-3d-print-of-an-insert-for-garden-hose-connection) and the compression nut (See https://www.printables.com/model/212710-3d-print-of-a-compression-nut-for-garden-hose-conn) I design and 3D print the tap to complete the connector set. Tap is common for all hose diameters
I used the standard thread available from Fusion 360. ISO pipe thread 26.441mm diameter (20/27 or ¾") and 1.814 pitch
Printed in Prusament PETG Jet Black with standard PrusaSlicer parameters for 0.20mm layer height
On top of .stl and .3mf files I uploaded Fusion 360 .f3d one so you can modify the design and adapt it to your needs
Next step will be the connecting sleeve…
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes
Enjoy
If you like this model, take a look also at my other designs
License:
Creative Commons — Attribution — Noncommercial — Share Alike
jcjames_13009
