Sovol SV01 Hotend Fan Holder

This is a replica of the hotend fan holder that holds the fan onto the hotend cooler. I reinforced the screwholes to make it stronger in that region. It fits 30mm fans.

If you are slicing with Cura enable "Print Thin Walls". You don't need to rotate it or something. Just print it as it is.

Print it with at least 4 walls.

Best printed with PETG or ABS because they are more flexible and can withstand higher temperatures, but you can probably also use PLA if you anneal it before.

I do not recommend to use the old screws since they are too short (even with the original holder). I recommend longer M3 screws.

UPDATES

Update 13.01.2020:

• Reinforced screwholes
• Uploaded two screwhole size version

Update 31.01.2020

• Made screwholes deeper
• Reinforced the upper region

Update 03.03.2020

• Completely overhauled the design and made it simpler
• Now only one screwhole version (2.85mm) that should fit all screws.
• Screwholes are now deeper (6.3mm)

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

0.12 - 0.16

Infill:

Filament: GEETECH PLA

Category: 3D Printer Accessories