Speed Bird - Scrambler (2015 Science Olympiad)

This is a straight driving ETV (Egg Transport Vehicle) for the 2015 division C Science Olympiad, Scrambler. It should be fully rules complaint but check dimensions before using this design.

Note: At time of upload, the design has not been tested in competition and has no guarantee of performance.

Note: The pictures included with this design show a Launcher Backpack installed, but this is not part of the original design and is a separate download. 

=====================================================

Printed Parts needed:

1x Block Bar (Final)

2x Speed Bird - Axle

4x or 8x CD/DVD Hubs 

1x Egg Block (to make it a Scrambler)

=====================================================

Hardware Needed:

12x M3 6mm Square Head Bolts or M3 6mm Wing Bolts 

12x M3 12mm Square Head Bolt

2x Makerbeam Extruded Aluminum Beams (300mm used in pictured cart)

8x #8-32 Nuts

1x #8-32 Wingnut

1x 1' of #8-32 thread rod

=====================================================

Info on the Design:

(2022 thoughts on a 2015 design) [under construction]

Category: Engineering