Mistral-E Noctua Remix

A remix of the Mistral-E cooling duct by Leo_N (Thingiverse) as I was irritated by the loud 4010 standard Creality Blower.

This design uses a 40x40x10 or 40x40x20 Noctua fan, or some other 24V fan if you don't want the hassle with the electronics. Don't solder a buck converter between the wires, as they are incompatible with the PWM your mainboard sends out.

I redesigned the entire part in Fusion 360 in order to get good dimensional accuracy and clearance for the bolts of the X-axis tensioner.

Best to print in a more heat-resistant material such as PETG or ABS and to equip your hotend with a silicone cover.

Use the longer two M2 bolts from the original blower to mount it to the fan casing.

This model is offered free of charge, but you can always support my work and buy me a coffee ;)