Pac-Man Themed Fridge Magnet Set

Pac-Man themed fridge magnet set.

Bring retro gaming back to life on your fridge door with Pac-Man and friends!

Print Pac-Man alone or print the whole set, the choice is up to you. All parts have been split in to separate files so you can pick and choose which parts to print.

Pac-Man, the pellets and power pellet are all designed to be printed in one single colour for a quick simple print.
The ghosts (Blinky, Inky, Pinky and Clyde) can be printed either in solid colour or with colour changes to produce the additional white and black layers for the eyes.
Scaredy is designed to be printed in 2 colours (blue and white).

Don't forget to add the colour changes as required when slicing the files.

If you think you may have issues with bridging then I would recommend printing the pellets and power pellet face down to prevent possible bridging issues with them being a smaller object. I have printed these face up at 0.20mm and 0.10mm without any issues.

If you want a silky smooth top surface to your magnet then don't forget to enable ironing for all top surfaces.

Designed for use with 8x3mm magnets. Also added a 6x3mm magnet variant.
8x3mm files will be marked with 8x3.stl and the 6x3mm files will be marked with 6x3.stl.

The pellets can be quite fun when trying to insert the magnets, don't be surprised if you find them pinging out of your grasp from time to time :D I did find the magnets were a lot easier to insert if the print is still warm and fresh off the print bed.

I recommend printing at approx 0.10mm layer height, 0.20mm should work ok but may not be as clean and crisp.

Magnet can be printed in multiple ways to achieve different colour schemes, just don't forget to add colour changes when you slice the file if you want multi colour magnets.

If you enjoy this print then please do share your make, I would love to see what colours and filaments you chose for your print.

If you have any questions about 3D printing, whether it be queries or you need some tips or tricks feel free to reach out in the comments or by message, I am always more than happy to help if I can!