Swivel Filament Guide

Swivel Filament Guide

Fully adjustable filament guide that mounts to extrusions with T-nuts.
Swivel mount rotates 360° for accurate positioning. It uses a 608 bearing in the pulley.

This was inspired by a pulley on thingiverse.
https://www.thingiverse.com/thing:3129612

Hardware required:
  1  - 608 Bearing
  1  - 3m x 12mm cap head screw
  4 - 4m x 12mm cap head screws
  2 - 4m nuts
  2 - 4m T-nuts

For heavy use applications, I suggest gluing the bearing and pulley halves together.

If you like, like.

Enjoy!