Xiaomi Wowstick 1F+ #Gridfinity holder

Design description

This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are.

Based on ZachFreedmans gridfinity design system and used the iFixit Gen 2 Holder as a starting point.

I noticed that the longer bits make the design not stackable upon, so I added a V2 (untested) that allows you to store the longer bits in a separate compartment on top. You'll need to take out the accessories as well to be able to stack upon.

This uses a 5x2 grid size and is about the same size as the included magnetic mat.

Versions

• V1: As pictured (25mm wide (de)magnetizer)
• V2: Extra slot to store long bits (25mm wide (de)magnetizer)
• V3: @kstuken make the (de)magnetizer slot wider (27mm wide (de)magnetizer)

Gridfinity description

Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop!

Gridfinity Tips!

•  No brims or support required!
• Use any filament with an 0.6mm or smaller nozzle.
• Wider bins can curl, so maximize your bed adhesion if you're going big!
• All storage blocks are compatible with all baseplates!
• Most storage blocks are stackable!
• You can add 6x2mm magnets to the corners! They won't magnetize the contents.
• You can also use M3 screws in the corners.

Gridfinity is the ultimate organizer for your whole workshop! Learn more at