Prusa Mini Hexagon Handle

This is a simple, yet durable, handle for the Prusa Mini. It was designed to match the David Warboss Mini Base. It attaches to the Z axis using screws and t-slot nuts.

Print Instructions

I was able to print this handle with no support material, but the surface finish did suffer a bit on the bottom and in the holes for the screws. You could try either way, but the included GCode is no supports, otherwise I recommend:

• Layer Height: 0.15mm
• Infill: 30%
• Supports: Not needed

Materials

In order to attached these you need some t-slot nuts and screws. I used:

• 3030 Series T-Slot Nut M6¹
• M6 x 12mm Button Head Screw¹
• Here is the Prusament PETG¹ that matches the Mini

Note: I make all of my models in Creo, Printables does not support the file type so I put all of my models in this GitHub Repo.

1) This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!