June 5, 2022
Description
I made a bumper like the one that comes with official Arduino UNO and Leonardo (or this one https://www.thingiverse.com/thing:26237) for the Teensyboy Pro (https://catskullelectronics.com/teensyboypro) .
By installing this minimalist case, it allows the Teensyboy Pro to be placed onto a flat conductive surface without shorting it out.
It also contain the mounting holes present in the board.
Uploaded .stl and source files .f3d, .step and .ipt.
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: BQ PLA Blue
Notes:
I used nozzle 0.4, but just print it with your comfy settings and enough nozzle and resolution so mounting holes are well defined.
Probably it will print well with nozzle 0.6 (I won't say it will with 0.8 though).If needed, after printing fit a screwdriver into the mounting holes so they get properly done and aligned with the board.
Designed using Autodesk Fusion 360 by measuring the original board measures.
License:
Creative Commons — Attribution
8
lpla
