F111 on a stand

I saw the F-111 from Captain_Ahab_62 and liked it. I found out that his version would print full size nicely at a 45 degree angle on my FLSUN Q5 given it's smaller bed size, with minimal issues with the supports coming off. I tried printing in the original orientation at 75% but was unable to remove the supports.

I flew the F111 and always wanted one on a stand to display, so I designed this version using Tinkercad. I'm new at this so I'm happy this one worked out

This model needs supports for the wing tips to print right. Twice my prints failed just on the wing tips, when I tried to limit the supports to only the print bed (see photo below). Had to have everywhere support to work.

Enjoy.

Print Settings

Printer:

FLSUN Q5

Rafts:

Supports:

Yes

Resolution:

Infill:

20%

Filament:

Hatchbox PLA

Black

Notes:

Post-Printing =============

Final product

Original F111 Swept printed at a 45 with supports

one of the failed prints without enough support on the wingtips

Category: 3D Printing