Netgear Nighthawk MR100 Hotspot Cooler

The Netgear MR 1100 hotspot gets hot very easily, and shuts down.  This Cooling case is designed to keep it cool even when under heavy load.  A small 40mm noctua fan is attached to the bottom of the case and is powered by the USB A output from the MR 1100.  A right angle usb A connector is used to connect the fan to the usb a outlet.  Cut the female side of the connector off and connect the Black and Red wires from the USB A male side to the corresponding black and Red wires of the Noctua 40mm fan.  The fan runs completely silent using a small amount of power.  It can run off the MR100 battery, or while connected to USB C power.

Needs 4 x 3.0 x 14mm cap screws to attach the fan to the bottom

See Amazon photos for the fan and the usb connector

Items need to complete

USB connector on amazon https://amzn.to/3mlaOte

5 Volt, 40mm Noctua fan on amazon https://amzn.to/3zgTwVO

3.0 x 14 mm Cap screws x 4  https://amzn.to/3mihV5s

Link to router on Netgear.com  https://www.netgear.com/home/mobile-wifi/hotspots/mr1100/