June 6, 2022
Description
This is a case that a Wemos D1 mini will just fit into.
I use it together with the "Funkwecker" firmware, which allows me to remotely turn on/off or reset my PC. For this purpose I lead out thin cables on the side, which are connected to the power and reset button of the PC.
If your printer prints reasonably precisely, the cover should sit firmly in the housing without screws or glue and also hold the D1 mini well in position.
I made the area for the USB plug wide enough so that the plug should be able to be inserted completely without problems.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
MakerMeik
