Nozzle Holder V-Slot (built-in m6 threads)

General

Note - This was tested on the Anycubic Kobra (regular/standard). This does not fit the Anycubic Kobra Max.

I really liked the idea of storing nozzles in the aluminum V-Slot but I didn't really have any m6 nuts available to keep the nozzles at bay. So in comes this remix that has them built-in as part of the model.

I screwed the nozzles in using a screw driver (with a wrench attachment) since you'll want some good grip/torque to spin them in. While it may be possible to do it by hand, I don't recommend it.

Print Details

I printed it as the STL is oriented with no supports. The overhangs in the holes should be doable with a decently calibrated printer. If anything, just print the top part as a test to see if you can thread your nozzle with the overhang.

I printed mine on a 0.8mm nozzle at 0.4mm layer height on PETG using my Anycubic Kobra and it came out pretty nicely.

Shout out to the original model creator 2md as this was an awesome idea!