Case for Arducam UC-733 Raspberry PI HQ Cam USB Adapter Board

A simple case for the Arducam UC-733 board.

The Fusion 360 source file is included to make remixes easier.

Hardware Required

This was designed around some basic hardware from McMaster Carr but their mesaurements are pretty standard and this case should work with similar sized inserts and similar M2.5 screws

• 4x M2.5 Heat-Set Threaded Inserts (McMaster Carr part 94459A439)
• 4x M2.5x16mm Screws (McMaster Carr part 92005A076)

Printing and Assembly Notes

See the attached “Prusa MINI Settings” M3F for recommended printing orientations for FDM printing.

Supports are required to make sure that the audio “ears” on the middle piece and the screw head recesses on the back piece print properly.