ULTiM8x8 modular, no-solder, RGB LED half cube

ULTiM8x8 modular, no-solder, RGB LED cube. Get yours here: http://wyolum.com/ultim8x8/

Print the half cube, or print three faces and glue them together.

Mount the LED panels to the cube using the screws included with the ULTiM8x8. I used crimp connectors to wire the LEDs, but you could probably just use washers and wrap the wire around the screws before attaching them.

I created this in Fusion 360 using this file for the hole placement: https://github.com/wyolum/ultim8x8/blob/master/fabricate/ultim8x\_cube02/cube02\_outerface.svg

Print instructions

Category: Electronics Print Settings

Printer Brand: Wanhao

Printer: Duplicator 6

Rafts: Doesn't Matter

Supports: Yes

Resolution: .15

Infill: 20

Notes:

I used supports because the Duplicator 6 isn't great at bridging the tops of the holes. With other printers, or with better part cooling, supports are probably not needed.