X215 Pro Arm Bumper and Soft Motor Mount

This is an arm bumper and soft motor mount for the Furibee X215 Pro FPV Racing Drone

I remixed the soft motor mount by @mcooz to add a lip to keep it from coming up during crashes, and to provide a bit of protection to the bottom of the arms.

I printed in TPE, nice and slow at 30mm/s, with retraction disabled, coasting and combing enabled, supports enabled, support interface enabled, etc.

I damaged a couple of the stock motors, so I swapped them out for the RaceDayQuads Badass 2206 2450kv Naked Bottom Racing Motor.

I switched to a Mach 2 VTX with MMCX connector, so I'm also using this FC stack mount for RDQ Mach 2 VTX (slim underslung version) by Wile_E.

Print instructions

Category: R/C Vehicles Print Settings

Printer Brand: Monoprice

Printer: Maker Ultimate

Rafts: Doesn't Matter

Supports: Yes

Resolution: 0..2mm

Infill: 100%

Filament: Inland TPE Black
Notes:

• Speed: 30mm/s
• Retraction: disabled (all metal hotend)
• Coasting: enabled
• Combing: enabled (All)
• Supports: enabled
• Support Interface: enabled