RGB LED Indoor FPV Micro Quadrotor Race Gate

RGB LED race gate for indoor FPV micro quadrotors (tiny whoops).

Update: I've added wall mount swivels, so you can mount your gates on the wall, and they rotate up against the wall out of the way when not being used.

Built with:

• 2 90-degree elbows
• 2 tees
• 2 flanges
• case
• lid
• 2 pins
• Adafruit Pro Trinket - 5V 16MHz
• Adafruit 60 NeoPixel RGB LED Strip
• 470 ohm resistors
• Tactile Button switches (6mm)
• Shield PCB
• Cheap USB Power Bank

• 3/4 in. x 10 ft. White PEX Pipe
  Wire/Connectors

• Pre-Wired JST SM Connectors
  OR

• JST-SM connectors

• SN-48B Crimping Tool

• 22 AWG Wire
  More info, source code, instructions: https://www.evilgeniuslabs.org/trinket-pro-rgb-led-micro-quadrotor-race-gate

Print instructions

Category: R/C Vehicles Print Settings

Printer Brand: Monoprice

Printer: Maker Ultimate

Rafts: Doesn't Matter

Supports: Doesn't Matter

Resolution: 0.2mm

Infill: 20%

Filament: Inland PLA White