Ender 3 filament guide with 6mm tube

A remix of ne0tec's version https://www.thingiverse.com/thing:4922036, which is a remix from the original file uploaded by Jonasen here https://www.thingiverse.com/thing:2894097

Print Settings

Printer Brand:

Creality

Printer: 

Ender 3 v2

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

0.2

Infill: 

25%

Filament: Smith3D PLA + / PLA Pro Light blue

Notes:

0.4mm nozzle

This Remix

The remix only fix the feed tube (OD=6mm) path to the creality all metal (MK8 iirc) single gear extruderfor Ender 3. Your mileage may vary depending on the type of extruder you have but I think it should be fine.

Print normally without support.

Custom Section

Optional #1: Filament dust filter with 6mm tube

The filament dry box feed tube (OD=6mm, ID=4mm) is secured on the entry of this dust filter (refer to the images attached) with the help of custom clip. On the exit, another cut of the feed tube is placed, going through the filament guide towards the extruder.

My printed version was designed with 6.2mm hole diameter for the feed tube and it sits loose, so I use some tape to secure it in place. Redesigned with 6.1mm hole but if you found yours also loose, just use some tape like mine (electrical tape or ptfe tape works just fine).

The file to this thing can be found here: https://www.printables.com/model/222160-filament-dust-filter-with-6mm-tube