Pipe Bushing

These bushings were created for the Fishers's Mobile Assembly Table, however can be used as a bushing when inserting 3/4" black pipe in a 1 3/8" hole. The original design bores a 1 1/8" hole in the surface spacers. If using these bushings, all holes are 1 3/8:

Drew Fisher's design for this table is "Awesome". View Mobile Assembly Table on Youtube

There are four bushings, 7mm, 17mm, 24mm, and 34mm.

7mm is for the left side of the table, inserted into drawer cabinet.

24mm is for the right side (cart sides)

34mm inserts into one side of the surface spacers. (1 required per spacer)
    or insert the 
17mm into each side of the surface spacers. (2 required per spacer)

When assembling the table, insert the pipe into the bushing in the correct location between spacers. One the table is mounted, slide the bushings into the wood.

Suggest adding a small amount of CA glue to hold the bushing in the hole.

All 3 bushings have an OD of 34.9 mm, allowing the bushing to be inserted in a

1 3/8" hole.

Caution.. The holes need to be aligned accurately for these to work.

Print Settings

Printer Brand:

Anycubic

Printer: 

Large Size Chiron

Rafts:

Doesn't Matter

Supports: 

No

Resolution:

.1618 or .20

Infill: 

none

Filament: Sunlu PLA+ black

Notes:

Tested with both .20 and .1618.
I made these parts "Solid", or "No" infill.

Category: Other