Simple Heart Earrings

Simple heart outline earrings.

Designed to be easy to print and lightweight at 2mm thick.

For best results print at a layer height of approx 0.10mm. These earrings have been designed so that they can also be printed at 0.20mm, however, the finish will not be as clean as a lower layer height.

If you want a silky smooth top surface to your earrings then don't forget to enable ironing for all top surfaces.

Print can even be scaled up to use as a necklace charm, or, scale up even bigger to use as a hanging decoration.

Filled version also available for those of you that might prefer a solid print rather than a thin outline.

With the filled version you could even put your own spin on the design by turning off top and bottom layers and playing with the infill percentage to create different patterned infills such as squares, honeycomb and more. The possibilities are endless!

For best results ensure your printer/filament is properly calibrated to avoid issues during the print. I also recommend printing at a low print speed.

If you enjoy this print then please do share your make, I would love to see what colours and filaments you chose for your print.

If you have any questions about 3D printing, whether it be queries or you need some tips or tricks feel free to reach out in the comments or by message, I am always more than happy to help if I can!