GSensei - G305 FDM No Support Shell with Magnatic Cover

This is a G305 Internals Shell shaped like a mix between Sensei Ten and Endgame XM1. You need 6 6x3mm magnets and quite a few M2 Screws in different lengths - you can buy a set on Amazon and you will be fine (Button/Socket/Flat doesn't matter).

I recommend printing the files with a 0.4 Nozzle, but 0.5 should work too. You should use some kind of PLA+/Tough PLA or CF PLA, because overhangs are on the limit and a fast hardening Filament will save you from failures.

You also need some kind of sandpaper, use some Wet-Sanding Paper. Use Water while sanding so you the Particles get bound and you don't inhale the Particles!

Before you buy the Parts i recommend printing the Shape (MouseShapeTester.stl) first, so you can tell if the mouse shape fits you!

Weight without Battery: 
70~ gramm

Print time in total:
about 3.5 hours

Sanding time:
At least 1 hour

Stay safe and happy printing :)