Mesh Pot Remix & Trays

I really liked the design and idea behind Lorro's Mesh Fabric Air Pot, so I modified my pot design to incorporate the pattern. This version will have the same root pruning benefits and can be used either by itself or with one of my existing frame designs. In case you don't want to print one of my pot frames, I have included my two water trays here as well.

All of Lorro's mesh pots will sit nicely in the trays, so please check out his models as well.

Enjoy!

Print Settings

• Nozzle – 0.4mm, 0.6mm, and 0.8mm all work fine
• Layer Height – 0.2mm
• Material – PETG (recommended), PLA, or other
• Infill – 20% Honeycomb
• Perimeters – 2 or 3
• Top Fill Pattern – Concentric
• Bottom Fill Pattern – Concentric
• Seam Position – Aligned
• In the “Layers and Perimeters” tab
  • CHECK “Detect thin walls”
  • UNCHECK “Detect bridging perimeters”
• In the “Advanced” tab
  • Set “External Perimeters” to 0.5mm (for a little extra thickness)

Instructions for Scaling Water Trays

If you want a water tray that is narrower or larger, simply follow these steps.

1. Upload model into PrusaSlicer, and make sure the part is selected
2. On the right side under “Object Manipulation” click the lock icon by “Scale factors” so that it is UNLOCKED
3. Change the X & Y values to alter the width of the tray, and change the Z value to alter the height

To maintain symmetry, change the X & Y values to the same one. Keep in mind that making the Z value smaller will thin out the bottom of the tray.

My Other Plant Pot Designs

Window Star

Rhombagon Spiral

Hexagon

Spiral Lattice