Glock 26 Plus 3 Mag Extension to fit Polymer 80 PF940SC Glock 26 Frame

First off, thanks to, PrintedFirearm, for providing the "Glock magazine base extension", as it gave me a good starting point,

and

thanks to, joestrander, for providing the "G19 to G26 mag adapter."

I modified the Glock magazine base extension file and combined and added the back part of the "G19 to G26 mag adapter" to it, providing a more stable and full grip for the palm area.

This magazine extension fits well and was tested on a factory Glock 26 10 round magazine and was made for the Polymer 80 PF940SC Glock 26 frame in mind.

Note:

In my experience, it was a tight fit and a bit tricky adding the last 2 - 3 (13 rounds total) rounds to the Factory 10rd magazine, I had to use a Glock Magazine Loader to push down on the magazine/rounds, and load the remaining rounds. Inserting the last 2 - 3 cartridges, I also had to slightly remove the mag extension, a tad bit (like half an inch, more or less) so there would be more clearance with the spring inside of the magazine to push down the rest of the cartridges.

Enjoy!

Print Settings

Printer Brand:

Monoprice

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

.2

Infill:

Filament: PRILINE Carbon Fiber Polycarbonate Black

Notes:

Category: DIY