Earphone / Earbud Stand compatible w/ Ear Loop Types

This earphone/earbud stand is compatible with the earphone-loop design such as Powerbeats Pro Wireless Earbuds or MPOW's Bluetooth Headphones, Wireless Earbuds for Running.

I didn't find an earphone-earbud holder / stand for my desk that I liked for my MPOW earbuds on Thingiverse so I designed one. This is a modular design, it comes with 4 parts:

1. Main rod (9mm) with four 4mm holes for small rods
2. Base - Bottom
3. Holder - Top
4. Small rod (4mm) (for winding the wire-cable of the earphones to the stand), print multiple ones, and screw them into the small holes on the main rod to wind longer wires.

This earphone/earbud stand might need some post-processing, such as in the area of the holes (the holes might be bigger or smaller, depending on your printer settings). Just like the pictures, you have the option to use your own screw to screw onto the main rod if you don't want to use the supplied rod (saves filament). The Screw / extra small rod is used only if you have a wire/cable for the earphone--as mine does, otherwise, you don't need it, if your earphones are truly wireless.

Please keep in mind the license associated with this design/files. If you want to strike a deal with me to sell this, I'm all ears.

Hook it up with a tip if you find this design useful. Also, constructive criticism and or feedback is welcome :-)

Print Settings

Printer Brand:

Monoprice

Printer:

Rafts:

Doesn't Matter

Supports:

Resolution:

.20 - .40mm

Infill:

Filament: ESUN PLA+ Olive Green Post-Printing =============

Post Processing, like cleaning up the holes may be required